https://bimpsoft.com/blog/en/Practical guides on accounting, manufacturing and finance, and real Bimp ERP implementation cases.enMon, 13 Jul 2026 07:10:31 GMThttps://bimpsoft.com/blog/en/2026/07/11/mrp-shared-component-problem/https://bimpsoft.com/blog/en/2026/07/11/mrp-shared-component-problem/Fri, 10 Jul 2026 21:56:58 GMTВалерія КущProductionMost MRP explainers stop at the basic net-requirement formula. The part that actually breaks in a spreadsheet is shared-component demand across multiple products. Here's the mechanism.https://bimpsoft.com/blog/en/2026/07/11/job-costing-assembly-manufacturers/https://bimpsoft.com/blog/en/2026/07/11/job-costing-assembly-manufacturers/Fri, 10 Jul 2026 21:53:17 GMTВалерія КущProductionStandard costing tells you what a product should have cost. Job costing tells you what it did. Here's the mechanism behind why most manufacturers only find out after the margin is already gone.https://bimpsoft.com/blog/en/2026/07/11/inventory-planning-stockout-overstock/https://bimpsoft.com/blog/en/2026/07/11/inventory-planning-stockout-overstock/Fri, 10 Jul 2026 21:44:51 GMTВалерія КущProductionWhy manufacturers so often run short on some materials while sitting on excess of others, and what breaks that cycle.https://bimpsoft.com/blog/en/2026/07/11/how-to-calculate-manufacturing-cost/https://bimpsoft.com/blog/en/2026/07/11/how-to-calculate-manufacturing-cost/Fri, 10 Jul 2026 21:39:28 GMTВалерія КущProductionA practical breakdown of why spreadsheet cost calculations drift from reality, and the three things an accurate number actually requires.https://bimpsoft.com/blog/en/2026/07/11/dscrete-process-manufacturing-one-system/https://bimpsoft.com/blog/en/2026/07/11/dscrete-process-manufacturing-one-system/Fri, 10 Jul 2026 21:26:20 GMTВалерія КущProductionMost manufacturing software is built for one mode, discrete or process, not both. Here's why that split causes problems for hybrid manufacturers, and what a real BOM structure needs to handlehttps://bimpsoft.com/blog/en/2026/07/10/vertical-vs-horizontal-erp-hybrid-manufacturers/https://bimpsoft.com/blog/en/2026/07/10/vertical-vs-horizontal-erp-hybrid-manufacturers/Fri, 10 Jul 2026 13:57:48 GMTДмитро ОбуховThe vertical-versus-horizontal ERP question is usually answered in generic terms. For a manufacturer running both discrete and process production, the calculation is more specific than that.https://bimpsoft.com/blog/en/2026/07/10/why-spreadsheets-break-assembly-manufacturers/https://bimpsoft.com/blog/en/2026/07/10/why-spreadsheets-break-assembly-manufacturers/Fri, 10 Jul 2026 13:39:14 GMTДмитро ОбуховProductionSpreadsheet failure in manufacturing isn't a feature gap. It's an architecture problem. Here's the mechanism, not just the symptoms.https://bimpsoft.com/blog/en/2026/06/18/uav-manufacturing-software-drone-production-erp-guide/https://bimpsoft.com/blog/en/2026/06/18/uav-manufacturing-software-drone-production-erp-guide/Thu, 18 Jun 2026 18:53:37 GMTДмитро ОбуховDrone ManufacturingDrone manufacturing ERP guide: BOM control, traceability, COGS accuracy, defense compliance. Real failure scenarios with cost analysis. Includes BIMP platform walkthrough.https://bimpsoft.com/blog/en/2026/06/18/odoo-for-manufacturing/https://bimpsoft.com/blog/en/2026/06/18/odoo-for-manufacturing/Thu, 18 Jun 2026 18:30:44 GMTДмитро ОбуховOdoo manufacturing limitations for small and mid-size producers: serial costing, capacity planning, configure-to-order gaps.